Interface IC's Accesorios SparkFun

Resultados: 33
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun Antenna GPS Embedded SMA 96En existencias
188En pedido
Min.: 1
Mult.: 1
No
Passive Components Antennas
SparkFun Accesorios SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 18En existencias
Más información disponible
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth Nordic or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You 20En existencias
Min.: 1
Mult.: 1
Adapters
SparkFun Accesorios SparkFun This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or 36En existencias
Min.: 1
Mult.: 1
Adapters
SparkFun Accesorios SparkFun This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se 50En existencias
Min.: 1
Mult.: 1
Cables
SparkFun Accesorios SparkFun Sometimes you want a small input and a single button just won't cut it. A 5-way tactile switch allows for a joystick-like interface in a very small package. These are surface mount but easily soldered. 16En existencias
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ which is hous 27En existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun FTDI Cable 5V VCC-3.3V I/O 26En existencias
Min.: 1
Mult.: 1

Cables USB Cables / IEEE 1394 Cables
SparkFun Accesorios SparkFun Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts 26En existencias
Más información disponible
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun Do you need *a lot *of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible with the SPI interface found on any SD c
Hoja de datos
47En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Hoja de datos
28En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins
Hoja de datos
16En existencias
5En pedido
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Potentiometers are incredibly useful whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with traditional potentiometers is the fact that your microcontroller doesn't have an easy way to interface wi 5En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Interface Cable N to RP-SMA Cable - 1m 4En existencias
4En pedido
Min.: 1
Mult.: 1
No
Cables Interface Cable N to RP-SMA - 1m
SparkFun Accesorios SparkFun These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than 16En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LED RGB Strip Addressable, 1m
Hoja de datos
15En existencias
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun Accesorios SparkFun LED RGB Strip Addressable, 5m
Hoja de datos
7En existencias
Min.: 1
Mult.: 1

Optoelectronics LED
SparkFun Accesorios SparkFun The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a
Hoja de datos
30En existencias
Más información disponible
Min.: 1
Mult.: 1

Breakout Boards Triple Axis Accelerometer Sensor
SparkFun Accesorios SparkFun If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is
Hoja de datos
55En existencias
Min.: 1
Mult.: 1

Breakout Boards Capacitive Touch Sensor
SparkFun Accesorios SparkFun This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only 48En existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun SOIC to DIP Adapter - 28-Pin 13En existencias
25En pedido
Min.: 1
Mult.: 1

Adapters
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
Hoja de datos
20En existencias
Min.: 1
Mult.: 1
Optoelectronics Red LED
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
Hoja de datos
23En existencias
Min.: 1
Mult.: 1

Qwiic Button with Green LEDs
SparkFun Accesorios SparkFun This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you 11En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
Hoja de datos
17En existencias
Min.: 1
Mult.: 1
Breakout Boards