SparkFun Accesorios SparkFun

Resultados: 915
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (PEN) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted 1En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Hoja de datos
35En existencias
Min.: 1
Mult.: 1
Displays 7-Segment Display
SparkFun Accesorios SparkFun 7-Segment Serial Display - Blue
Hoja de datos
41En existencias
25En pedido
Min.: 1
Mult.: 1

Displays 7-Segment Display
SparkFun Accesorios SparkFun These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED "
Hoja de datos
40En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur
Hoja de datos
25En existencias
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t 84En existencias
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole. 196En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun We know this looks like a lot of our other LEDs but it's not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin except it is a lot simpler to solder into yo
Hoja de datos
34En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set
Hoja de datos
50En existencias
Más información disponible
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Optoelectronics LED - Red with Resistor
SparkFun Accesorios SparkFun LilyPad Button Board
Hoja de datos
40En existencias
Más información disponible
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o 15En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Arduino ProtoShield- Bare PCB 3En existencias
Más información disponible
Min.: 1
Mult.: 1

Shields ProtoShield
SparkFun Accesorios SparkFun ProtoShield Kit 7En existencias
Min.: 1
Mult.: 1

Shields ProtoShield
SparkFun Accesorios SparkFun LilyPad Coin Cell Battery Holder 20mm
Hoja de datos
224En existencias
Min.: 1
Mult.: 1

Battery Holders Battery Holder - Coin Cell
SparkFun Accesorios SparkFun LilyPad LED White (5pcs)
Hoja de datos
49En existencias
120En pedido
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Rainbow (6 colors)
Hoja de datos
44En existencias
35En pedido
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Pink (5pcs)
Hoja de datos
16En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Green (5pcs)
Hoja de datos
35En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Blue (5pcs)
Hoja de datos
8En existencias
14En pedido
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Red (5pcs)
Hoja de datos
90En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun LilyPad LED Yellow (5pcs)
Hoja de datos
17En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun SparkFun Qwiic Shield for Arduino 21En existencias
Min.: 1
Mult.: 1

Shields Qwiic Connect System
SparkFun Accesorios SparkFun The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Boards LilyPad E-Sewing ProtoSnap
SparkFun Accesorios SparkFun The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
Hoja de datos
2En existencias
Min.: 1
Mult.: 1
Carrier Boards Weather:bit