MP2700GC-0000-Z

Monolithic Power Systems (MPS)
946-MP2700GC-0000-Z
MP2700GC-0000-Z

Fabricante:

Descripción:
Administración de baterías 26V Input, 1A Linear Charger with Programmable JEITA for 1 or 2 Cell

Ciclo de vida:
Nuevo en Mouser
Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 2,983

Existencias:
2,983 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
14 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
S/ -.--
Precio ext.:
S/ -.--
Est. Tarifa:

Precio (PEN)

Cantidad Precio unitario
Precio ext.
S/ 7.48 S/ 7.48
S/ 4.56 S/ 45.60
S/ 3.82 S/ 95.50
S/ 2.90 S/ 290.00
S/ 2.51 S/ 627.50
S/ 2.20 S/ 1,100.00
S/ 1.98 S/ 1,980.00
Envase tipo carrete completo (pedir en múltiplos de 3000)
S/ 1.52 S/ 4,560.00
S/ 1.48 S/ 8,880.00

Atributo del producto Valor de atributo Seleccionar atributo
Monolithic Power Systems (MPS)
Categoría de producto: Administración de baterías
RoHS:  
Linear Chargers
Li-ion, Li-polymer, LiFePO4
13.5 V
WLCSP-8
SMD/SMT
MP2700
Reel
Cut Tape
Marca: Monolithic Power Systems (MPS)
País de ensamblaje: Not Available
País de difusión: Not Available
País de origen: CN
Temperatura de trabajo máxima: + 125 C
Temperatura de trabajo mínima: - 40 C
Corriente de suministro operativa: 1 A
Dp - Disipación de potencia : 500 mW (1/2 W)
Tipo de producto: Battery Management
Cantidad de empaque de fábrica: 3000
Subcategoría: PMIC - Power Management ICs
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

MP2700 1-to-2-Cell 26V/1A Linear Chargers

Monolithic Power Systems (MPS) MP2700 1-to-2-Cell 26V/1A Linear Chargers are for 1-cell to 2-cell Li-ion, Li-polymer, and LiFePO4 batteries, as well as 2-cell to 6-cell NiMH batteries. The MP2700 components can sustain a voltage of up to 26V. The MP2700 measures the battery voltage (VBATT) and automatically charges the battery in four phases: trickle charge, pre-charge, constant-current (CC) fast charge, and constant-voltage charge. When the battery is charged to full voltage, the charge current decreases slowly due to the internal battery resistance. The MP2700 automatically terminates the charging when the charge current drops below the termination current (ITERM) threshold. After termination, the MP2700 can recharge the battery automatically once VBATT drops below the recharge threshold.